2024 Vermeer® Whole Tree Chippers WC2300XL

Information

2024 Vermeer® Whole Tree Chippers WC2300XL

Handle material efficiently to help produce a valuable end-product.

As the push toward alternative fuels accelerates, governments and industries are recognizing the advantages of using wood chips as a source for power generation. Now with a CAT C-13 Tier 4 Final engine with 440 hp (328 kW) of power, the WC2300XL whole tree chipper offers a powerful solution for producing wood chips. Material can be handled efficiently with variable-speed dual-infeed conveyor chains and SmartCrush technology, and maintenance is simple with replaceable high-wear parts. Expand your revenue stream with the ability to produce valuable end-product from log or slash with the WC2300XL whole tree chipper.

Features may include:

Multiple engine options
  • A CAT C13 Tier 4 Final engine provides 440 hp (328 kW) of power to meet your jobsite demands. A Tier 3 engine option is available for less-regulated countries.
SmartCrush and variable-speed, dual-infeed conveyor chains
  • With technology such as SmartCrush to automatically increase down pressure when difficult material enters the cutting drum, and the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.
Remote controls
  • A remote control allows operators to view engine parameters and change a variety of settings.
Two knife options
  • Two knife options, with depths of cut of 3/8 in (.9 cm) or 5/8 in (1.6 cm), allow the operator to select the knife that meets their end product sizing needs.
Built-in skidder grab
  • The WC2300XL has a compact design and built-in skidder grab on the tongue, allowing it to be moved around on-site by a skidder or excavator.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Whole Tree Chippers WC2300XL
  • Toolbox: Lockable | Tongue: Fixed with skidder grab | type: Leaf spring
  • Available
  • Drum/disc: 86.4 cm | Infeed Roller: 86.4 cm | Feed Table: 248.9 cm
  • Maximum Feed: 68.6 cm | Chute: 335.3 cm

Specifications

  • 2024
  • Vermeer®
  • Whole Tree Chippers
  • WC2300XL
  • General
  • 113.1 cu-cm
  • Motor: WS-Series | Planetary: Auburn Model 9
  • Dual axle
  • Air
  • 385/65R22.5 Super Single
  • 22.5 x 14 aluminum
  • Group 8D 1155 CCA (Dual)
  • System Voltage: 24V | Switches: Toggle On/Off | Controller: ASM - C248 WC2300 | Display: DP04
  • 1169 | Feed Roller: 29.9 m/min
  • 119 db(A) / 118.1 db(A)
  • System Type: Open-center | Flow Control: Two-feed roller and infeed conveyor
  • Feed Roller Down Pressure: 1530 | System relief pressure: 275.8 bar | Auto Reverse PSI: 262 bar
  • Pump Flow at Maximum RPM: 60.6 L/min
  • Toolbox: Lockable | Tongue: Fixed with skidder grab | type: Leaf spring
  • 10" x 4" x .375" wall rectangular tubing
  • Pintle
  • Lock - Number of Positions: 8
  • Material Capacity: 58.4 cm | Thickness: 1 cm | Drum/Disc Diameter: 91.4 cm | Knife Thickness: 1.6 cm | Knife Size: 8.5 | Bedknife Thickness: 3.8 cm | Dimension of Pockets: 21.6 cm | Infeed Roller Diameter: 71.1 cm | Feed Roller Distance to Drum: 2.5 cm | Bottom Thickness: .3 cm | Wear Plate Thickness: .5 cm | Top Thickness: .5 cm | Side Wall Thickness: .5 cm | Deflector Thickness: .5 cm | Side Deflector Angle: 14 deg | Infeed Slope: 6 deg | Bedknife Size: 34" wide | Grapple Handle: 30" wide
  • Maximum (Operation): 9.1 m | Feed Table: 3 m
  • Maximum: 9.1 m
  • Maximum: 248.9 cm
  • Maximum: 3.3 m
  • Drum/disc: 86.4 cm | Infeed Roller: 86.4 cm | Feed Table: 248.9 cm
  • Maximum Feed: 68.6 cm | Chute: 335.3 cm
  • Coolant Capacity (Engine and Radiator): 18.5 gal
  • Tank: 159 L
  • Type: Babbitted | Useable Edge: one | Replaceable Threaded Knife Block: Hex nut (4) per knife | Fixture Method: Bolt | Bedknife - Number of Useable Edges: 2 | Number of Pockets: 8 | Number of Bearings: 2 | Tooth Design: Straight knives | Drive Manufacturer: White | Feed Roller Orientation: Horizontal | Number of Feed Rollers: One upper, one conveyor | Rotation Type: 14 | Rotational Lock: 22 | Filtration Method: Intake suction screens and return filter | Oil Cooler: 1 | chassis manufacturer: Dexter | Feed Conveyor Type: Dual independent chain | Number of Infeed Chains: 1
  • 14832.5 kg / 15875.7 kg | Tongue: 3061.7 kg / 3311.2 kg | With Shaft: 997.9 kg | Infeed Roller: 260.8 kg
  • hydraulic Recommended: Hy-Power 68
  • A8 chipper steel | Bedknife: Cold-formed low-carbon bar | Fender Description: Jeep style (steel) | infeed: .38" thick | Bottom Replaceable Wear Plate: AR 400
  • 8 | Number of Bolts/Knife: 4 | Number of Replaceable Wear Plates: 8 counter knives | 12