2024 Vermeer® Horizontal Grinders HG4000

Information

2024 Vermeer® Horizontal Grinders HG4000

The first of the next-generation Vermeer grinders

When your waste becomes too much to handle, the HG4000 horizontal grinder is here. Built for aggressive performance and high capacity in a compact footprint, this machine has industry-leading features that make it a dependable, efficient and durable mid-sized grinder. The HG4000 is equipped with innovative technology and aggressive performance in a next-generation.

Features may include:

Complete control
  • Optimize productivity and flexibility when operating the grinder with these two features: An industry-leading (or technologically-advanced), full-function, wireless remote control lets you, from the cab, adjust machine settings as conditions change, including control of the infeed settings, engine droop, conveyor height and more. The 7-in onboard color touch screen display shows machine data and allows you to intuitively set up the machine for maximum efficiency.
Contamination defense
  • Machine damage caused by metal contaminants entering the hammermill can be costly. The Vermeer Damage Defense system helps protect your machine by detecting certain metal contaminants, which reduces the likelihood of metal being processed by the hammermill. Combined with the cross band magnet that minimizes metal from ground material, you can maximize the value of your end product.
CAT engine power
  • The 536-hp (399.7-kW) CAT C13B engine provides the horsepower needed for processing difficult materials, and is backed by worldwide service and support for maximum productivity.
Powerful feeding
  • With a feed opening of 42 in x 60 in and robust infeed sidewalls that are double the strength of its predecessor, you can feed whole trees and other large material with less restriction. The feed roller is equipped with aggressive teeth, coupled with down pressure, that provide pull in power and maintain control of the material being fed to help get the job done efficiently. Maximize feedability with low side walls, providing optimal flow of material and minimizing operator interaction.
Maintenance-friendly design
  • The grinder's maintenance-friendly design features large access shields, ladders, dropdown platform to access the engine, mill access at the front or the top, remote grease zerks and drive belt tensioning. This optimizes serviceability and minimizes maintenance time.
Intelligent feed system
  • Let the machine do the work. The intelligent feed system self-monitors the machine's engine speed, makes predictive adjustments and holds the engine at an optimal level. This allows you to spend more time feeding and less time adjusting settings, which maximizes your productivity and fuel efficiency.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Horizontal Grinders HG4000
  • C13B
  • Tongue Description: Fabricated | Fender description: Formed steel, replaceable
  • Ultra-low sulfur diesel (<15 ppm)
  • Available
  • Feed Table: 152.4 cm | Infeed Roller: 142.2 cm | Discharger: 121.9 cm | Liner Dimensions: 62-in (157.4-cm) | Anvil Dimensions: 13.6-in (34.5-cm) | Millbox Opening: 60-in (152.4-cm) | Chipper Drum Millbox Opening: 60-in (152.4-cm) | Feed opening: 35.5-in (90.2-cm)
  • Loading: 2.3 m | Load: 4.3 m | Liner Dimensions: 21.5-in (54.6-cm) high | Anvil Dimensions: 6.1-in (15.6-cm) | Millbox Opening: 30.5-in (77.5-cm) | Chipper Drum Millbox Opening: 31-in (78.7-cm) | Feed opening: 60-in (152.4 -cm)

Specifications

  • 2024
  • Vermeer®
  • Horizontal Grinders
  • HG4000
  • Horizontal
  • C13B
  • CAT
  • Tier 4 final/Stage V
  • 6
  • Gross (Maximum): 399.7 kw
  • 2450 Nm
  • Dry-type with primary and secondary elements and restriction indicator
  • Full-flow, spin-on
  • Medium: Liquid (nitrite-free, pre-diluted 50/50)
  • Max Fuel Consumption: 103 lph
  • Ultra-low sulfur diesel (<15 ppm)
  • Hydraulic-operated twin disc | Engagement: Push button | Hydraulically-activated variable pitch
  • Radial piston motor | Motor: Fixed displacement motor/planetary | Planetary: 34.2:1 | Fixed displacement motor
  • Spring | Manufacturer - Option One: Hutchens Industrial, Inc.
  • ABS
  • 385/65R22.5
  • Option One Aluminum
  • 8D-MHD, 1400 CCA (qty. 2) | Battery Type: AA (6) | Channel Setting: 50 channels
  • 24 V 250 A | 24 Volt
  • Drum: 1113 rpm | Tip (Duplex): 2930.7 m/min | Drum: 842 rpm | Tip (1-in chip): 2217.1 m/min | Belt: 190.5 m/min
  • Screen Area: 20200 sq cm
  • 112.3 dB
  • System Type: Open-loop, pressure and flow compensated | System Type: Open-loop
  • Variable displacement, axial piston | Fixed displacement gear pump
  • Pump at Maximum RPM: 61.7 L/min | Pump Flow at Maximum RPM: 25.3 gpm (96.5 L/min)
  • 3000 psi (206.8 bar) / Discharger: 2900 psi (200 bar)
  • Tongue Description: Fabricated | Fender description: Formed steel, replaceable
  • Unit body construction
  • 5th wheel
  • Infeed Roller Diameter: 71.1 cm | Duplex Drum Diameter: 57.2 cm | Chipper Drum Diameter: 69.3 cm | Tip Diameter: 79.5 cm | Drum Skin Thickness: 3.3 cm | Bearing - Inner Race Diameter: 10.9 cm | Center Retention Pin Dimensions: 2-in (5-cm) diameter x 75.3-in (191-cm) long | Drum Skin Thickness: 3.8 cm | Knife Thickness: .625 in (1.6 cm) | Shaft diameter: 12.7 cm | Screen Dimensions: .75-in (1.9-cm) thick | Liner Dimensions: 16-in (40.6-cm) radius | Idler Roller Bearing: 1-15/16, 4-bolt flange | Standard Drive Roller Diameter: 32.5 cm | Magnetic Drive Roller Diameter: 32.5 cm | Operating Range: 300 ft (91.4 m) | Idler Roller Diameter: 30.5 cm
  • 43.2 cm
  • Maximum (5th wheel): 9.8 m
  • Maximum (Operation): 15.8 m | Feed Table: 4.6 m | Discharger: 6.1 m | Anvil Dimensions: 73.5-in (186.7-cm)
  • Maximum: 2.5 m
  • Maximum: 4 m
  • Feed Table: 152.4 cm | Infeed Roller: 142.2 cm | Discharger: 121.9 cm | Liner Dimensions: 62-in (157.4-cm) | Anvil Dimensions: 13.6-in (34.5-cm) | Millbox Opening: 60-in (152.4-cm) | Chipper Drum Millbox Opening: 60-in (152.4-cm) | Feed opening: 35.5-in (90.2-cm)
  • Feed Table: 50.8 cm | of Cut Adjustable: .125 in (.31 cm) to 1 in (2.5 cm)
  • Loading: 2.3 m | Load: 4.3 m | Liner Dimensions: 21.5-in (54.6-cm) high | Anvil Dimensions: 6.1-in (15.6-cm) | Millbox Opening: 30.5-in (77.5-cm) | Chipper Drum Millbox Opening: 31-in (78.7-cm) | Feed opening: 60-in (152.4 -cm)
  • Duplex Drum: 154.7 cm | Chipper Drum: 152.4 cm
  • Coolant Capacity: 39.7 L
  • tank: 757.1 L
  • Oil Volume with Filter: 34.1 L
  • Feed Table: 3.5 cu m | Bearing - Dynamic: 61688.6 kg
  • Fan: Flexxaire (variable pitch) | Fan - CAC: Electric (variable speed) | Tooth Design: Serrated bars | Number of Teeth: 10 | Feed Roller Down Pressure: Adjustable | Number of Hammers: 9 | Number of Tips: 18 | Front Idler Roller Construction: Self-cleaning auger | Deflector Position: Variable | Curtain description: Rubber | Number of Wipers: Four-blade spiral fan | Useable Edges: 1 | Number of Bolts: 2 | Number of Pockets: 12 | Shaft Retention Type: Keyless bushing | Number of Screens: 2 | Number of Sides: 1 | Anvil Type: Adjustable, replaceable wear surfaces |1 Splice: R2 stainless steel cable | Return Roller Quantity: 3 | Filtration Method: Dual return filters | Number of Coolers: 1 | Motor Series: TH | System Protection: Fused | Switches: Sealed membrane CAN bus keypad / Sealed membrane | Radio remote type: R424 | Display Type: LCD | Trailer Light Type: 12-24V LED | Number of axles (5th wheel): 2
  • 29.1 L
  • Max 5th wheel: 23586.8 kg | Tongue: 7692.9 kg | Axle: 16964.4 kg | Infeed Roller: 1224.7 kg | Duplex Drum: 2435.8 kg | Chipper Drum: 2135.1 kg | C
  • Recommended: API CJ-4, 15W-40 | Recommended: Vermeer HyPower 68
  • Drive: V-belt | Belt Design: 3-ply, 330# with V-cleat
  • Air to boil temperature: 128° F (53° C) | Flare: Integrated with bolt on corner flare | steel | Drive Roller: Welded steel | Front Idler Roller: Self-cleaning steel auger | Infeed Floor: Welded steel with replaceable UHMW wear plates | Fabricated steel | A8 mod chipper steel | Screen Type: Abrasion-resistant steel | Millbox lid liner: Abrasion-resistant steel
  • Feed: Welded slat chain
  • Double row spherical roller
  • 12 | Number of: 2