AgZone, Inc.
- 5310 Pyrogy Dr.
- Glendon, AB T0A 1P0
- Call Us: (780) 635-3936
- https://www.agzone.ca/
2024 Vermeer® Trommel Screens TR5300
Information
2024 Vermeer® Trommel Screens TR5300
Ideal for operations where high productivity in a compact size is demanded.The TR5300 trommel screen is ideal for operations where high productivity in a compact size is demanded. The tensioned screen and drum are designed for optimum productivity, offering simple adjustments and maintenance. The ability for the conveyors to go parallel to the ground gives the operator more control over dust and wind, while also allowing for easier maintenance. The TR5300 features a maintenance access platform for the Deutz TD 2.9L Tier 4 Final (Stage IV), 74 hp (55 kW) engine.
Features may include:
Added rigidity to screens- With the ability to tension the screen around the drum, operators can add rigidity to the screens. This design allows the use of smaller gauge wire, ultimately increasing the open area of the screen to help improve productivity.
- Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote. From either control, the operator can choose from four programmable presets or adjust machine settings based on incoming material.
- A set of dual-hinged doors on both sides of the machine expose the full length of the trommel drum for ground level service and removal.
- A hydraulic-driven chain drive system allows the drum to be lifted off the cog for service, and bolt-on sprockets can be changed quickly to help lower repair time.
- The TR5300 features a large, low-feed hopper that makes it easier to load with a loading ramp, making the trommel screen more mobile around the jobsite
- Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handdeld transceiver remote.
Highlights
- Glendon, Alberta
- 2024
- Vermeer®
- Trommel Screens TR5300
- Available
- Operation: 286.5 cm| Hopper Bottom: 86.4 cm | Hopper Opening: 37 | Head Pulley Type: 38" (96.5 cm)| Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)
- Operation: 4.6 m | Conveyor Belt Stacking: 15' | Hopper: 9.5
Specifications
- 2024
- Vermeer®
- Trommel Screens
- TR5300
- General
- Conveyor: 540.8 cu-cm
- Single Leaf Sprung
- Option One: 445/50R22.5
- Drum Drive Chain: 140 custom extended pin
- Fines Belt: 152.4 m/min | Drum: 0-24 RPM
- Drum Operation: 0-30.9 gpm (0-117.0 L/min)
- Description: Heavy Duty Structural Tubing
- Head Pulley Takeup: 25.4 cm | Brush Diameter: 35.6 cm | Head Pulley Bearing: 2 7/16" (6.2 cm) pillow block | Self-Cleaning Return Idlers: 4" (10.2 cm) rubber disc, qty 8 | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, with 2.4" (6.1 cm) shaft | Head Pulley Type: Rubber lagged, 12" (30.5 cm) diameter | Conveyor Operation: 64.4 L/min | Troughing Idler Type: 20° CEMA "B" with permanently sealed bearings | Drum Support Description: Eight poly trunnion rollers 8" (20.3 cm) diameter 4" (10.2 cm) width | Drum Angle Adjustability: 0-7 degrees | Drum Diameter: 1.5 m | Thrust Bearing Diameter: 4 in (10.2 cm) | Thrust Bearing Face: 7.4 cm | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings
- Operation: 27.4 m | Drum: 4.6 m | Fines Conveyor: 16.8 m | Hopper Opening: 34
- 11.9 m
- Operation: 4.6 m | Conveyor Belt Stacking: 15' | Hopper: 9.5
- 249.9 cm
- Operation: 286.5 cm| Hopper Bottom: 86.4 cm | Hopper Opening: 37 | Head Pulley Type: 38" (96.5 cm)| Self-Cleaning Tail Pulley Dimensions: 38" (96.5 cm)
- 4.1 m
- Conveyor Belt: 91.4 cm
- 100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40%
- 4.2 cu m
- Tank: 208.2 L
- Maximum Screen Panels: 4
- 14515 kg | Hitch: 5261.7 kg
- Bristle: Polyethylene
- Conveyor: 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option
- Single Leaf Sprung
- Fines Conveyor: 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing