2024 Vermeer® Trommel Screens TR626

Information

2024 Vermeer® Trommel Screens TR626

Powerful workhorse making short work of processing material.

With a 6 ft/1.83 m drum and a hopper that holds 6 cubic yards/4.6 cubic meters, the TR626 makes short work of processing material. Access the drum through removable side panels, drum end or top of the drum. Its 125 hp/93.2 kw John Deere 4045 Tier 4 Final is a powerful workhorse. Impressive 72.5 ft/22.1 m conveyor features self-cleaning tail pulley and return idlers.

Features may include:

Startup delay and alarm systems
  • Enhance worker safety with startup delay and alarm systems that notify your whole crew when the machine is about to start.
Tall, wide throat opening
  • Move material smoothly without bridging, thanks to a tall, wide throat opening.
Heavy-duty rollers
  • Extend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.
Keep screen weights low
  • Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.
Reduced spillage
  • Speed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.
Low hopper infeed height
  • Forget the loading ramps, since the 626 has a low hopper infeed height.

Photos

Highlights

  • Glendon, Alberta
  • 2024
  • Vermeer®
  • Trommel Screens TR626
  • Available
  • Operation: 287 cm | Apron Opening: 109.2 cm | Apron Conveyor Belt: 121.9 cm | Drum Support Description: 4 in (10.2 cm) width | Head Pulley Type: 38" (996.5 cm)
  • Operation: 4.8 m | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Apron Opening: 86.4 cm | Hopper: 9.5' (2.9 m) from ground level at operating incline

Specifications

  • 2024
  • Vermeer®
  • Trommel Screens
  • TR626
  • General
  • Conveyor: 629.3 cu-cm | Drum: 48.8 cu in (800 cu cm)
  • Leaf spring
  • Option One: 235-75R 17.5H qty. 4
  • Drum Drive Chain: 140 WT
  • Fines Belt: 123.4 m/min | Apron Conveyor: 0-35 fpm (0-10.7 m/min) | Drum: 0-24 rpm
  • Operation: 15.4 gpm (58.3 L/min) | Drum Operation: 0-42.6 gpm (161.3 L/min) | 62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa])
  • Description: 4 independent hydraulic jacklegs
  • Self-Cleaning Return Idlers: 6, each 4" (10.2 cm) diameter | Tail Pulley Takeup: 30.5 cm | Rubber Flashing: Adjustable, .25" (6.44 cm) thick, 4" (10.2 cm) | Head Pulley Bearing: 2.5" (6.4 cm) pillow block | Head/Tail Pulley Type: Rubber-lagged, 12" (30.5 cm) diameter | Brush Diameter: 35.6 cm | Troughing Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers | Drum Angle Adjustability: 0-7 degrees | Drum Diameter: 1.8 m | Drum Support Description: Four steel trunnion rollers 8 in (20.3 cm) diameter | Hopper Opening: 13.2' x 5.3' (4 m x 1.6 m) | Thrust Bearing Diameter: 12.7 cm | Thrust Bearing Face: 7.4 cm | Brush Assembly Support: Two 1.25" (3.2 cm) sealed ball bearings | Self-Cleaning Tail Pulley Dimensions: 10" (25.4 cm) diameter, with 2.4" (6.1 cm) shaft | Head Pulley Type: Rubber lagged, 12" (30.5 cm) diameter | Rubber Flashing: Adjustable, .25" (.64 cm) thick, 4" (10.16 cm) | Self-Cleaning Return Idlers: 11, each 4" (10.2 cm) diameter | Fines Conveyor Frame: 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • Operation: 25.7 m | Drum: 7.9 m | Apron Conveyor: 4.9 m | Fines Conveyor: 22.1 m
  • 16.6 m
  • Operation: 4.8 m | Conveyor Belt Stacking: 16.6' (5.1 m) with drum at 4 degrees | Apron Opening: 86.4 cm | Hopper: 9.5' (2.9 m) from ground level at operating incline
  • 287 cm
  • Operation: 287 cm | Apron Opening: 109.2 cm | Apron Conveyor Belt: 121.9 cm | Drum Support Description: 4 in (10.2 cm) width | Head Pulley Type: 38" (996.5 cm)
  • 4.1 m
  • Conveyor Belt: 91.4 cm
  • Bottom: 121.9 cm
  • Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%
  • 4.6 cu m
  • Tank: 757.1 L
  • Apron Conveyor Rollers: 4" (10.2 cm) diameter qty. 14 | Maximum Screen Panels: 8 | Idler Type: 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
  • 29483.5 kg | Hitch: 13607.8 kg
  • Bristle: Polyethylene
  • Conveyor: 220 lb (99.8 kg), 2-ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) / 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Leaf spring
  • Fines Conveyor: Part of trailer frame