2018 McHale Fixed Chamber Round Balers 25 Knife Chopper Baler

2018 McHale Fixed Chamber Round Balers 25 Knife Chopper Baler

At the higher end of the McHale F5000 Fixed Chamber Round Baler Range is the McHale F5600 fully automatic round baler, this is the highest specification round baler in the McHale F5000 round baler range.

The McHale F5600 is fitted with a servo operated load sensing control valve and an expert plus control console, which makes the round baling process fully automatic.

Once the round bale is formed, net is automatically applied; the tailgate then automatically opens releasing the high density round bale, the tailgate on the F5600 baler then automatically closes and pressurises.

Features may include:

• On the McHale F5600 Fully Automatic Round Baler, the left hand side of the gearbox drives rollers in the bale chamber, while the pick up and chopper unit are driven from the right hand side of the machine. This system ensures direct short transfer paths and optimal power distribution.

• The McHale F5600 fully automatic round baler is equipped with a 2.1 metre galvanised pick up, which lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The F5600 fully automatic round baler comes standard with pneumatic guide wheels, which contact the ground on exactly the same line as the tines and guide the pick up perfectly over uneven ground.

• The McHale F5600 fully automatic round baler is equipped with the same high capacity 25 knife chopper unit and rotor as the McHale Fusion 3 integrated baler wrapper. As crop enters the spiral rotor, pairs of rotating tines feed the crop through the chopping unit. The double tines on the rotor ensure high output while the spiral layout reduces the load peaks as the F5600 fully automatic round baler works in heavy swarths.

• The McHale F5600 fully automatic round baler is designed to achieve maximum output, however as baling conditions are not always ideal, uneven swarths can occur, which can lead to blockages. The main drive chain on the F5600 fully automatic baler is protected by a slip clutch on the PTO.

• The bale chamber on the McHale F5600 fully automatic round baler produces a 1.23 X 1.25 metre round bale. The bale chamber on the F5600 baler is comprised of 18 heavy duty rollers. Chamber bearings are 50mm, with double raced bearings on the main load points to stand up to the most testing conditions.

• The bearings are supported by a progressive greasing system.

• Once the bale is netted in the chamber of the McHale F5600 round baler, the tailgate of the baler automatically opens, allowing the high-density round bale to be ejected. Once the bale has passed over the bale kicker the tailgate of the baler automatically closes, allowing the operator to continue baling.

• The McHale F5600 fully automatic round baler has a sensor on the bale kicker, which ensures that the bale has been ejected from the chamber before the tailgate closes.

• An Expert Plus Control Console, which features a large graphic display, controls the McHale F5600 round baler; this allows the operator to monitor the baling process graphically from the control console.

• A new high performance netter has been designed and developed for the F5000 range.