2024 Vermeer® Pipeline Directional Drills D1000x900
- Year 2024
- Make Vermeer®
- Model Pipeline Directional Drills
2024 Vermeer® Pipeline Directional Drills D1000x900
2024 Vermeer® Pipeline Directional Drills D1000x900
Maximize your drilling muscle with the field-tested D1000x900 Navigator® horizontal directional drill.Loaded with feature after feature to improve performance, reliability and durability, the D1000x900 is equipped with dominating twin Caterpillar C-27 engines, producing a maximum of 92,000 ft-lb (124,735.3 Nm) of rotational torque and 1,000,000 lb (4,448.2 kN) of thrust/pullback.
Features may include:
High-torque, low-speed Hagglunds hydraulic motors- Operates efficiently with high-torque, low-speed Hagglunds hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
- Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.
- Helps prevent rod wrap or windup because its floating vise allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
- Muscles through difficult ground formations with higher torque than other models.
Engine
Engine Manufacturer
CAT
Engine Type
C-27
Emissions
Tier 2 (EU Stage II)
Engine Power
Gross: 596.6 kw
Rated Engine Speed
Max: 2000 rpm | Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm | Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm
Engine Torque
Maximum Spindle Torque (Low at Maximum Engine RPM): 135582 Nm | Maximum Spindle Torque (Medium at Maximum Engine RPM): 50843.3 Nm | Maximum Spindle Torque (High at Maximum Engine RPM): 51521.2 Nm
Displacement
18.1 L
Cooling
Liquid
Aspiration
Turbocharged aftercooled
Fuel System
Fuel System
Diesel | Fuel consumption: 112.4 lph
Suspension
Suspension
Triple axle with air ride suspension
Operational
Operating Conditions
Thrust: 4448.2 kN | Pullback: 4448.2 kN | Maximum Spindle Torque: 138971.6 Nm | Maximum Spindle Torque (Low at Maximum Engine RPM): 138971.6 Nm | Breakout Force: 343022.5 Nm | Clamp Force: 338955 Nm
Operating Speed
Maximum Carriage Speed at Maximum Engine RPM: 23.5 m/min
Dimensions
Dimensions
Drill Rack Angle: 8 degrees to 12 degrees | Mud Swivel: 7.6 cm | Configuration: 3-jaw clamp, 8 " (20.3 cm) | Travel: 1.8 m | Inside Diameter: 24.9 cm / 25.4 cm
Transport Length
Min: 15.4 m
Transport Height
Min: 3.5 m
Length
3.1 m | Front Base Anchor: 6.1 m | Front Flat Anchor: 2.9 m | Rear Base Anchor: 4.9 m | Powerpack: 6.8 m
Width
2.6 m | Driller: 2.6 m | Front Base Anchor: 1.8 | Front Flat Anchor: 1.5 m | Rear Base Anchor: 2.4 m | Powerpack: 2.4 m
Height
2.7 m | Front Base Anchor: 61 cm | Front Flat Anchor: 20.3 cm | Rear Base Anchor: 20.3 cm | Powerpack: 3.1 m
Capacities
Fuel Capacity
Tank: 1892.7 L
Hydraulic Capacity
Tank: 2725.5 L
Weights
Weight
45812.8 kg | Driller: 2721.6 kg | Powerpack: 17236.5 kg | Lower breakout vise: 1723.7 kg
Features
Features
Number of Rear Legs: 2 | Heat and Air Conditioning: In-wall combination unit | Number of Rotation Motors: 1 | Number of Drive Motors: 4 | Configuration: 2-jaw clamp