2024 Vermeer® Pipeline Directional Drills D330x500
- Year 2024
- Make Vermeer®
- Model Pipeline Directional Drills
2024 Vermeer® Pipeline Directional Drills D330x500
2024 Vermeer® Pipeline Directional Drills D330x500
Ability to travel to job sites at any time of day.Sized within legal dimensions in transport mode, the D330x500 travels to job sites at any time of day. Once there, you’ll set up fast because of its self-contained design. The 486 hp/363 kW Caterpillar C-15 Tier 3 diesel engine gives you a ground-penetrating 50,000 ft-lb./67,800 Nm of rotational torque and 330,000 lbs/1,468 kN of thrust/pullback.
Features may include:
Climate-controlled, two-person cab- Improves productivity through a climate-controlled two-person cab that features 360° visibility, a state-of-the-art operator’s station and fingertip controls on the electronic joysticks.
- Increases manpower efficiency, because drilling controls, fluid controls, transport and crane can all be controlled from a single person in the cab.
- Muscles through difficult ground formations with higher torque than other models.
Engine
Engine Manufacturer
Caterpillar
Engine Type
C-15
Emissions
Tier 4 Final (EU Stage V)
Engine Power
Gross: 402.7 kw
Rated Engine Speed
2100 rpm | Maximum Spindle Speed (Low at Maximum Engine RPM): 36 rpm | Maximum Spindle Speed (Medium at Maximum Engine RPM): 53 rpm | Maximum Spindle Speed at Max Engine RPM: 88 rpm
Cooling
Liquid
Aspiration
Turbocharged
Engine Torque
Maximum Spindle Torque (Low at Maximum Engine RPM): 67791 Nm | Maximum Spindle Torque (Medium at Maximum Engine RPM): 50843.3 Nm | Maximum Spindle Torque (High at Maximum Engine RPM): 33895.5 Nm
Fuel System
Fuel System
Diesel| Fuel consumption: 109.5 lph
Operational
Operating Conditions
Thrust: 1512.4 kN | Pullback: 1512.4 kN
Operating Speed
Maximum Carriage Speed at Maximum Engine RPM: 17.1 m/min | Maximum Carriage Speed in Low at Maximum Engine RPM: 12.8 m/min | Maximum Ground Drive Speed at Maximum Engine RPM: 4.8 km/h
Hydraulics
Hydraulic Flow
Auxiliary Pump at Maximum Engine RPM: 32 gpm | Thrust/Pullback Pump Flow at Max Engine RPM: 530 L/min | Rotation Pump Flow at Maximum Engine RPM: 530 L/min
Maximum Pressure
Auxiliary Pump Relief: 206.8 bar | Thrust/Pullback Pump Relief: 413.7 bar | Rotation Pump Relief: 399.9 bar
Dimensions
Dimensions
Angle of Approach: 18 deg | Maximum Operating Angle (Fore/Aft): 30 deg | Maximum Operating Angle (Left/Right): 30 deg | Minimum Bore Diameter: 16.5 cm | Rotation: 360 deg | Maximum Reach: 762 cm | Drill Rack Angle: 13-18 deg
Transport Length
Min: 1625.6 cm | Min 20 ft (6.1 m); 1109.5 cm
Transport Width
With cab: 254 cm
Height
with cab: 340.4 cm
Capacities
Fuel Capacity
Tank: 794.9 L
Hydraulic Capacity
Tank: 757.1 L | System: 1022.1 L
Hitch Lift Capacity
6350.3 kg | Boom Extended/Max Reach: 1179.3 kg
Weights
Weight
40823.3 kg
Features
Features
Hydraulic Supply Filter Rating: 200 | Hydraulic Return Filter Rating: 6