2024 Vermeer® Pipeline Trenchers T955III

2024 Vermeer® Pipeline Trenchers T955III

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model Pipeline Trenchers
2024 Vermeer® Pipeline Trenchers T955III

2024 Vermeer® Pipeline Trenchers T955III

2024 Vermeer® Pipeline Trenchers T955III

Cut through the most difficult rock trenching conditions around.

To cut through the most difficult rock trenching conditions around, Vermeer offers the T955 Commander® 3 trencher. Equipped with a Caterpillar C13 ACERT Tier 3 turbocharged diesel engine, the T955III boasts 415 hp (310 kW). Due to the high-torque rise engine, when you encounter tough trench digging conditions, the engine speed drops, increasing the torque for more power to pull through. With a rugged D6 track chain and a sectionalized trencher boom allowing customized trench depths, the T955III also brings heavy equipment strength and versatility to your construction site.

Features may include:

Low-speed, high-torque motor
  • Use the trenching machine more effectively with less wear due to its low-speed, high-torque, splined headshaft motor.
Standard remote
  • Decrease trencher teeth inspection and replacement maintenance time through a standard remote control that can start or stop the engine, raise or lower the trencher boom and rotate the chain at a slow speed.
Extra wide conveyor opening
  • Promote high-volume spoil removal with an extra-wide 30-in (76.2-cm) dirt conveyor opening that helps reduce jamming.
Rotary power trencher drive motor
  • A rotary power trencher drive motor and splined headshaft produce a lower speed and higher torque which provide superior ground penetration and low chain wear for better production results.

Brakes

Parking Brake and Emergency: spring-applied, hydraulic release, wet disc brake
Brake System Type Service: Hydrostatic

Operational

Operating Speed Maximum Ground- Low: 20.7 m/min | Maximum Ground - High: 41.5 m/min | Conveyor Belt Range: 0-1070 fpm (0-326 m/min)

Hydraulics

Ground Pressure Maximum: 91.7 kPa | Minimum: 80.7 kPa
Pump Type pressure-and-flow-compensated (load-sensing)
Hydraulic Pump Flow at Maximum RPM: 105.6 L/min
Maximum Pressure Setting: 172.4 bar

Dimensions

Dimensions Approach Angle: 16 deg | Conveyor Shift Distance Range: 5" or 65" (12.7 cm or 165.1 cm) | Tilt Track Max Angle:
Length with 40" (101.6 cm) End Idler and 6 ft (1.83 m) Boom: 9.8 m | with 40" (101.6 cm) End Idler and 12 ft (3.66 m) Boom: 12.1 m | with 40" (101.6 cm) End Idler and 10 ft (3.05 m) Boom: 11.3 m | with 40" (101.6 cm) End Idler and 8 ft (2.44 m) Boom: 10.6 m | Conveyor: 108" or 168" (274.3 cm or 426.7 cm)
Width Ranges: 114" (289.6 cm) | Belt: 76.2 cm
Height Range: 133" (337.8 cm) | Discharge Range: 62" - 76" (157 cm - 193 cm)
Track Width Pad Ranges: 24" (61 cm)
Track Length 408.9 cm

Capacities

Oil capacity Tank: 575.4 L

Weights

Weight Range: 78,000 lb - 109,000 lb (35,380.2 kg - 49,441.6 kg)

Features

Features Control System: TEC Plus with SmartTEC | Track Size: D6
Conveyor Type Style: Curved | Belt Style: Cleat or finger type
Oil Type Vermeer HyPower 68 or Vermeer HyPower 100
Track Type Drive: Dual path hydrostatic with planetary transmission | Pad: Single, double or triple grouser
Discharge Type Direction: Right or left

Product Photography