2024 Vermeer® Trommel Screens TR5300EM
- Year 2024
- Make Vermeer®
- Model Trommel Screens
2024 Vermeer® Trommel Screens TR5300EM
2024 Vermeer® Trommel Screens TR5300EM
Designed with the productivity, versatility and mobility to conquer that next job.The TR5300EM was designed to help accomplish the job wherever it may take you next. Powered by an industrial-duty, fully enclosed, and fan-cooled 60-hp (44.7-kW) Siemens electric motor, this machine was built to reduce exhaust emissions, jobsite noise and machine maintenance. Tension screen drum features are designed for optimum productivity offering simple and quick screen change, allowing you to separate a variety of material.
Features may include:
Tension screen design- The ability to adjust the screen quickly will allow operators to change opening size, wire gauge and type of wire so you can separate a wide variety of material.
- Operators can control the machine through a Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.
- The TR5300EM is powered by an industrial-duty, fully enclosed and fan-cooled electric motor. A single 60-hp (44.5-kW) motor powers the hydraulic pump stack. Electric motors reduce exhaust emissions, jobsite noise and maintenance compared to diesel.
- Access to critical points on the machine allows for efficient maintenance on components such as motor, trommel drum and drum drive.
- A hydraulic-driven chain drive system allows the drum to be lifted off the cog for service, and bolt-on sprockets can be changed quickly to help lower repair time.
- The TR5300EM features a large, low-feed hopper for ease of loading without a loading ramp, maximizing jobsite mobility.
Motor
Displacement
Conveyor: 540.8 cu-cm
Suspension
Suspension
Single leaf sprung
Wheels & Tires
Tires, Rear Specification
Option One: 445/50R22.5
Electric
Electrical
Drum Drive Chain: 140 custom extended pin
Operational
Operating Speed
Fines Belt: 152.4 m/min | Drum: 0-24 rpm
Hydraulics
Hydraulic Pump
Drum Operation: 0-30.9 gpm (0-117 L/min) | Operation: 64.4 L/min
Chassis
Frame Type
Fines Conveyor: 2 in (5.1 cm) x 8 in (20.3 cm) structural steel tubing | Description: Heavy-duty structural tubing
Dimensions
Dimensions
Head Pulley Takeup: 10 in (25.4 cm) | Brush Diameter: 35.6 cm | Head Pulley Bearing: 2 7/16-in (6.2-cm) pillow block | Self-Cleaning Return Idlers: 4-in (10.2-cm) rubber disc, qty 8 | Self-Cleaning Tail Pulley Dimensions: 10-in (25.4-cm) diamater, 2 7/16-in (6.1-cm) shaft | Head Pulley Type: Rubber-lagged, 12-in (30.5-cm) diameter | Drum Support Description: Eight poly trunnion rollers 8-in (20.3-cm) diameter | Troughing Idler Type: 20-deg CEMA "B" with permanently seated bearings | Drum Angle Adjustability: 0-7 deg | Drum Diameter: 1.5 m | Thrust Bearing Diameter: 10.2 cm | Thrust Bearing Face: 7.4 cm | Brush Assembly Support: Two 1.25-in (2.3-cm) sealed ball bearings |
Length
Operation: 27.4 m | Drum: 4.6 m | Fines Conveyor: 16.8 m | Hopper Opening: 34-in tall
Transport Length
11.9 m
Height
Operation:4.6 m | Conveyor Belt Stacking: 15 ft | Hopper: 9.5 ft (2.9 m)
Transport Width
249.9 cm
Width
Operation: 286.5 cm | Head Pulley Type: 38-in (96.5-cm) | Self-Cleaning Tail Pulley Dimensions: 96.5-cm | Hopper Opening: 37-in
Transport Height
4.1 m
Conveyer Width
Conveyor Belt: 91.4 cm
Hopper Width
Bottom: 94 cm
Capacities
Volume
100 cu yd (76.5 m3) per hr with 0.5-in (12.7-mm) screens installed and material with moisture less than 40%
Hopper Capacity
4.2 cu m
Fuel Capacity
Tank: 208.2 l
Features
Chasis Capacity: 9071.8 kg
Weights
Weight
Hitch: 5261.7 kg | 14515 kg
Features
Features
Drum Drive Chain: 140 custom extended pin | Maximum Screen Panels: 4
Construction Material
Bristle: Polyethylene
Belt Type
Conveyor: 220-lb, 2-ply, 3/16 in x 1/16 in, R2 splice