2024 Vermeer® Trommel Screens TR6400

2024 Vermeer® Trommel Screens TR6400

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model Trommel Screens
2024 Vermeer® Trommel Screens TR6400

2024 Vermeer® Trommel Screens TR6400

2024 Vermeer® Trommel Screens TR6400

Designed with toughness, compactness and ease of maintenance in mind.

The TR6400 trommel screen was designed with toughness, compactness and ease of maintenance in mind. The 100 hp (75 kW) Deutz Tier 4 Final engine, combined with a 6 ft (1.8 m) by 20 ft (6.1 m) drum is ideal for topsoil, compost and woody biomass applications.

Features may include:

Deutz 3.6L Tier 4F (Stage IV) engine
  • The Deutz 3.6L Tier 4F (Stage IV) engine meets all U.S., Canada and European Union tier/stage regulations.
Drum service access
  • A single large drum door along the side and entry from the end provide superior drum service access.
Low hopper height
  • A low hopper infeed height helps to decrease loading cycle times and eliminates the need for loading ramps with most loaders.
Quick change drum
  • Efficiently change product size by exchanging drums
Quick change screens
  • Screen changes can help improve jobsite efficiency, a particularly important feature when processing a range of materials that requires frequent screen changes. The design also creates a smooth exterior on the drum, reducing the amount of brush wear.
Square lift bars
  • Square lift bars inside the drum enable more material to be carried at a slower drum speed helping decrease fuel consumption and premature wear.
Swing-out engine bay
  • A single large access door provides engine service access.
Tensioned screens
  • Compatibility with smaller gauge wire increases the open screen area thus overall production of the machine, particularly in applications when processing wetter materials.
Vermeer ACS control system
  • These control systems offer the operator flexibility when operating from the machine or cab of the loader. Operators can also adjust conveyor height from the remote, providing the ability to keep them low to the ground to reduce blowing of material.

Motor

Displacement Conveyor: 232.7 cu-cm | Drum: 35.5 cu in (581.7 cu cm)

Suspension

Suspension Leaf spring

Wheels & Tires

Tires, Rear Specification Option One: 445/50 R22.5

Electric

Electrical Drum Drive Chain: 140 extended pin/extended width

Operational

Operating Speed Collecting Belt: 109.7 m/min | Fines Belt: 121.9 m/min | Apron Conveyor: 0-15 fpm | Drum: 0-25 rpm

Hydraulics

Hydraulic Pump Drum Operation: 0-33.1 gpm (0-125.3 L/min) | Operation: 77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar)

Chassis

Frame Type Description: Four independent hydraulic jacklegs | Fines Conveyor Frame: Engineered structural frame

Dimensions

Dimensions Head Pulley Takeup: 20.3 cm | Self-Cleaning Return Idlers: 4 in (10.2 cm) rubber disk x 3 | Tail Pulley Takeup: 15.2 cm | Idler Type: 4 in (10.2 cm) CEMA "B" straight | Head Pulley Bearing: 1.5 in (3.8 cm) pillow block | Brush Diameter: 35.6 cm | Troughing Idler Type: 20 deg CEMA "B" with permanently sealed bearings spaced at 40-in centers | Drum Support Description: 8 polyurethane trunnion wheels on pivoting bogeys 8 od (20.3 cm) | Drum Angle Adjustability: 0-5 deg | Drum Diameter: 2 m | Hopper Opening: 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | Thrust Bearing Diameter: 10.2 cm | Thrust Bearing Face: 5.1 cm | Head/Tail Pulley Type: 8 in (20.3 cm) crowned | Self-Cleaning Tail Pulley Dimensions: 8 in diameter, 38 in , crowned wing pully | Head Pulley Type: 8 in (20.3 cm) crowned | Apron Conveyor Rollers: 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | Brush Assembly Support: Two 1.25 in (3.2 cm) sealed ball bearings/brush | Self-Cleaning Return Idlers: 2, 4 in (10.2 cm) diameter; 1, 5 in (12.7 cm) diameter, "rattle roller" | Head Pulley Bearing: 1.75 in (4.4 cm) double roller
Length Operation: 16.5 m | Collecting Conveyor: 4.9 m | Drum: 6.1 m | Fines Conveyor: 7.2 m | Apron Conveyor: 3.8 m
Transport Length 12.2 m
Height Operation: 5.1 m | Conveyor Belt Stacking: 10.5 ft (3.2 m) (conveyor @ 30 deg) | Apron Opening: 114.3 cm | Hopper: 9.5 ft (2.9 m) from ground level at operating incline
Transport Width 251.5 cm
Width Operation: 749.3 cm | Apron Opening: 95.3 cm | Apron Conveyor Belt: 106.7 cm | Self-Cleaning Tail Pulley Dimensions: 38 in | Drum Support Description: 4 in (10.2 cm)
Transport Height 4 m
Conveyer Width Conveyor Belt: 91.4 cm
Hopper Width Bottom: 95.3 cm

Capacities

Volume Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40%
Hopper Capacity 5 cu m
Fuel Capacity Tank: 302.8 L

Weights

Weight 16782.9 kg | Hitch: 1905.1 kg

Features

Features Rubber Flashing: Adjustable corded rubber | Maximum Screen Panels: 8
Construction Material Bristle: Polyethylene
Belt Type Conveyor: 220 lb (99.8 kg), 2 ply, 2/16 x 1/16 in (4.8 mm x 1.6 mm) smooth
Axle Bearing Extensions, Rear Leaf spring

Product Photography