2024 Vermeer® Tub Grinders TG5000E
- Year 2024
- Make Vermeer®
- Model Tub Grinders
2024 Vermeer® Tub Grinders TG5000E
2024 Vermeer® Tub Grinders TG5000E
As your stationary operation looks to electric-power, Vermeer is your partner for the equipment expertise you need.The TG5000E tub grinder is equipped with a 500-hp (373-kW) motor to provide power to the mill. With the option to configure either a soft-start or VFD starter panel – along with Vermeer features like the duplex drum design and continuous undermill discharge conveyor system – the TG5000E has the flexibility and features you need for productive processing.
Features may include:
Enclosed fan-cooled electric motor- The TG5000E is equipped with a 500-hp (373-kW) Weg totally enclosed fan-cooled electric motor to power the mill. A separate 60-hp (44.7-kW) electric motor powers the pump for the hydraulic circuits, while a 2-hp (1.5-kW) electric motor powers the fan to cool the hydraulic system.
- The motor starter panel provides options to configure a control system that best fits your application - whether that’s a soft-start or VFD panel.
- The duplex drum offers proven cutting performance, and reversible hammers and tips nearly double the wear life of single-sided designs and simplify daily maintenance.
- The patented TORS reduces the amount and distance of thrown objects, and has a smooth underside for better material flow.
- Monitor real-time performance and data via the on-rig display or remote control.
- Designed to handle more production with less clogging, the 36-in (91.4-cm) wide continuous undermill discharge conveyor system offers optimum speed and capacity.
Engine
Engine Type
Information: Motor start/stop
Engine Torque
1967.3 Nm
Cooling
Medium: Air
Engine Power
Gross Horsepower (Maximum): 372.8 kw
Model Id
WEG W22
Drivetrain
Drive System
Drive Motor: Open loop | Drive Type: Continuous sprocket
Brakes
Brake System Type
Bar: T1 steel, replaceable
Battery
Battery
Type: AA (qty 6)
Electric
Electrical
System Voltage: 24 VDC
Operational
Operating Speed
Tub: 10 rpm | Belt: 195.1 m/min | Drum: 1785 rpm
Hydraulics
Hydraulic Pump
Flow at Maximum RPM: 72.7 L/min
Maximum Pressure
System relief: 193.1 bar
Pump Type
Gear
Dimensions
Dimensions
Drum Diameter: 57.2 cm | Tub Table Thickness: 1 cm | Millbox Opening: 24.2" x 47.9" (61.4 cm x 121.5 cm) | Table Tilt Degrees: 91 deg | Inside Diameter of Tub: 2.4 m | Inside Flare Diameter - At Base of Tub: 2.5 m | Inside Flare Diameter - At Tub Opening: 3.7 m | Wall Thickness: .3 in (.6 cm) | Operating Range: 300' (91.4 m) | Idler Roller Diameter: 20.3 cm | Standard Drive Roller Diameter: 32.5 cm | Magnetic Drive Roller Diameter: 32.5 cm | Screen: 49.5" x 28.5" x 14.9" (126 cm x 72.4 cm x 37.8 cm) | Tip Diameter: 72.6 cm | Drum Skin Thickness: 4.4 cm | Cutter Block Types: Block style single bolt wide 3" x 3.5" (7.6 cm x 8.9 cm) wide; 2-bolt 2" x 3" (5.1 cm x 7. 6 cm) narrow | Center Retention Pin Dimensions: 2" (5.1 cm) | Distance - Screen to Millbox Wall: 27.9 cm | Breaker Bar Dimensions: 2.5" x 3" (6.4 cm x 7.6 cm)
Transport Height
Maximum: 3.6 m
Width
2.5 m | Discharge: 91.4 cm | Electrical: 182.9 cm / 302.3 cm
Length
Maximum- Conveyor Unfolded: 15.6 m / 7.3 m
Transport Length
Maximum: 8.9 m
Height
Loading: 3.2 m | Load: 4.3 m | Electrical: 221 cm / 236.2 cm
Depth, Maximum
Of tub: 28 in (71.1 cm) | Of tub: 1.5 m | Electrical: .6 cm
Screen Area
17509.6 sq cm
Cutting Width
Drum: 116.8 cm
Capacities
Volume
Tub Capacity: 8.6 cu m
Features
Tank: 359.6 L
Weights
Weight
Rear Mount Pad (Operation): 13902.6 kg | Front Mount Pad (Operation): 6713.2 kg | Engine Option One: 19087.2 kg | Screen: 181.4 kg | Electrical: 816.5 kg / 1369.8 kg
Features
Features
Torque Limiter: PT Tech - Continuously engaged, friction type | System Protection: Fused | Filtration Method: In-tank return filters (qty 2) | Number of Coolers: 1 | System Type: Open loop | Tub Table Type: T1 Steel | Wall Type: T1 Steel | Tub Roller Quantity: 8 carrier, 8 guide (16 total) | Tub Agitators: 4 | Switches: Sealed membrane | Display Type: Analog hydraulic gauges, LCD multifunction | Channel Setting: 50 channels | Splice: Flexco R2 stainless steel | Return Roller Quantity: 5 standard and 1 vibrating roller | Number of Hammers: 8 | Number of Cutters: 16 | Number of Wipers: 2 | Bearing Type: spherical roller | Frame Description: Continuous I-beam | Thrown Object Restraint System: Pivoting tub cover assembly | Tub Cover Description: Hydraulically activated | Tub Cover Positions: 2 | Falling Object Protection at Control Station: Overhead and side protection
Oil Type
Recommended: Hy-Power 68
Construction Material
Screen Type: Fabricated from abrasion resistant steel (qty 2)
Gauges
Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure
Belt Type
Design: One piece, 330# with V-cleat
Chain Type
Drive Chain: 120H roller chain