2024 Vermeer® Brush Chippers BC1200XL Gas
- Year 2024
- Make Vermeer®
- Model Brush Chippers
- Engine PSI 4.XL
2024 Vermeer® Brush Chippers BC1200XL Gas
2024 Vermeer® Brush Chippers BC1200XL Gas
When there’s tough brush-clearing work to do, you can count on the Vermeer BC1200XL to handle it.The electronic fuel injection engine provides improved fuel economy with 115 horsepower (85.8 kW). This allows for more efficient working conditions and boosts engine response under load.
Features may include:
Dual horizontal offset feed rollers- Get more done thanks to the aggressive feeding action of dual horizontal offset feed rollers.
- Protect your engine with the SmartFeed system, which monitors engine speed and stops or reverses the feed rollers if needed.
- Prevent premature wear to the belt drive system using the clutchless PTO system, which prevents high-speed engagement of the cutter drum.
- With improved fuel economy, the 115-hp (85.8-kW) Origin gas engine allows for more efficient working conditions and boosts engine response under load.
Engine
Engine
PSI 4.XL
Cylinder Liners
6
Engine Power
Gross (Maximum): 85.8 kw
Engine Torque, Maximum
313.2 Nm
Air Cleaner
2-stage dry with safety valve
Oil Filter
Spin-on
Cooling
Medium: Liquid
Bore
6.2 cm
Motor
Motor Type
Manufacturer: White Hydraulic
Fuel System
Fuel Injection
Electronic
Fuel System
Max Fuel Consumption: 31.4 lph
Fuel Type
Gasoline
Suspension
Suspension
Axle/Suspension: Torsion | Type - Option: Rubber torsional | Manufacture: Dexter axle
Brakes
Brake System Type
Electric
Wheels & Tires
Tires, Front Specification
ST235/80/R16 Load Range E / ST285/75/R16 Load Range E
Wheels
16" (40.6 cm)
Battery
Battery
Group 31; 950 CCA
Electric
Electrical
System Voltage: 12 volt | Switches: Lower feed stop bar senstivity, toggle, SmartFeed and Ecoldle | Controller: Vermeer ACS | Display: LCD | Shutdown System: High temperature, low pressure
Alternator
70 Amp
Operational
Operating Speed
Feed: 110 ft/min | drum: 2000 rpm | Winch Input: 51 rpm
Operating Conditions
Actuation Force: 15.4 kg | Rope Line Pull: 907.2 kg
Performance
Noise Level
124 dB(a)
Hydraulics
Hydraulic Type
System Type: Open center, dual pumps
Hydraulic Pump
Pump Flow at Maximum RPM: 17 L/min
Maximum Pressure
System relief: 172.4 bar | Auto Reverse: 172.4 bar | Winch relief: 151.7 bar
Airflow
2000 cfm
Chassis
Chassis
Tongue Description: 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) | Tongue Extension: Extendable 18" (45.7 cm) | Fender Description: Bolt-on
Frame Type
7" (17.78) Z channel; 0.25" (0.64 cm) thickness
Hitch/Type
Pintle
Lights and Safety
Lighting
Trailer Light Type: LED
Dimensions
Dimensions
Fan: 19" sucker | Tongue Description: 6.4 cm x 11.4 cm x 9.5 mm | Feed Roller Minimum Distance to Drum: 2.5 cm | Feed Roller Dimension: 15 | Feed Roller Dimension (Two): 11.1" (28.3 cm) | Infeed Throat Capacity: 13.3" x 17" (33.7 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 171.2 cm | Distance from Feed Table to Ground: 69.1 cm | Infeed Table Material Thickness: .5 cm | Bottom Feed Stop Bar Diameter: 5.1 cm | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 5.1 cm | Material Thickness: .3 cm | Material Capacity: 33.8 cm | Thickness: 1 cm | Knife Thickness: 1.6 cm | Knife Size: .625" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 2.5 cm | Bottom Thickness: .2 cm | Top Thickness: .3 cm | Side Wall Thickness: .3 cm | Deflector Thickness: .3 cm | Chute Rotation Angle: 270 deg | Winch Boom Structure: .25" (6.4 mm) Grade 50 | Winch Rope: 7/16' (1.11 cm)
Length
Feed Table Up, Tongue In: 426.7 cm | Table Down, Tongue Extended: 523.2 cm | Infeed Table: 76.5 cm | Rope: 45.7 m
Width
200.7 cm | Infeed Table: 132.1 cm | Drum: 50.8 cm
Height
261.6 cm | Infeed Hopper: 81.3 cm | Chute: 264.2 cm
Capacities
Oil capacity
Oil Volume with Filter: 4.3 L
Cooling System
Coolant Capacity (Engine and Radiator): 15.1 l
Load Capacity, Land
Feed Roller Clamp Load: 1202 kg
Hydraulic Capacity
Tank: 45.4 L
Features
Dynamic: 14242.8 kg | Static: 24267.2 kg | Chasis: 7000 lb (3175.2 kg)
Weights
Weight
Of Feed Roller: 68 kg / 36.3 kg | With Shaft: 217.7 kg | Engine Option One: 2576.4 kg | Tongue - Engine Option One: 299.4 kg
Features
Features
Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic cylinder | Number of Feed Roller Motors: 2 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, and reverse | Useable Edges: 2 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Manual pivot with handle | Filtration Method: 10 micron return, 100 micron suction | Lock - Number of Positions: 2 | Type: Spherical roller | Manufacturer: Linkbelt | Winch Controls: Forward, reverse and free spool
Oil Type
Recommended: SAE 10W30 | hydraulic Recommended: Vermeer VMF
Construction Material
A8 chipper steel | Bedknife Material: 1018
Knife Quantity
8 / 12 | Number of Bolts/Knife: 4
Paddle Quantity
5
Belt Type
5V