2024 Vermeer® Stump Cutters SC292

2024 Vermeer® Stump Cutters SC292

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model Stump Cutters
2024 Vermeer® Stump Cutters SC292

2024 Vermeer® Stump Cutters SC292

2024 Vermeer® Stump Cutters SC292

Contractors can now fit into tighter spaces for more efficient stump grinding.

The self-propelled SC292 stump cutter is equipped with a 26.5 hp (19.8 kW) EFI Kohler engine providing full-sized power in a compact unit. Convenience and safety features include a hydraulic ground drive system, exclusive Vermeer Yellow Jacket™ Cutter System and operator presence handle system design that disengages the cutter wheel if the operator lets go of the controls. Reduce engine, drivetrain and structural stress in typical stump removal. The Vermeer SC292 is a great addition to any tree care and rental equipment fleet, a perfect complement to any Vermeer brush chipper or mini skid steer

Features may include:

Easier start-up
  • Starts easier with the electronic fuel injected 26.5 hp (19.8 kW) EFI Kohler engine.
Selectable two-speed ground drive
  • Move easily between stumps with the selectable two-speed ground drive.
Convenient belt servicing
  • All of the belts are found on one side of the machine for convenient belt servicing.
Extended warranty
  • Protect your stump cutter investment with a 2-year/2000 hour or 3-year/3000 hour extended warranty

Drivetrain

Clutch Electric clutch with brake
Steering Steerable Axle Type: Manual single wheel or dual hydraulic steering axle

Suspension

Suspension Axle/Suspension Rigid/Fixed

Wheels & Tires

Tires, Front Specification Tires - Option One: 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard

Battery

Battery 400 CCA

Electric

Electrical Shutdown System: Oil pressure shutdown | System Voltage: 12 V

Operational

Operating Speed Low Travel: 20.1 m/min | High Travel: 40.5 m/min | Cutterwheel: 1400 rpm

Performance

Noise Level Sound Power: 105.4

Hydraulics

Maximum Pressure System relief: 140 bar
Hydraulic Type Flow Control: AutoSweep (option) or 2 speed ground drive
Hydraulic Pump Flow at Maximum RPM: 14 L/min

Chassis

Chassis Control Station Description: Fixed side locations
Hitch/Type Adapter for TLR25 trailer
Frame Type Description: Welded tube and plate steel

Lights and Safety

Lighting Warning: Oil pressure, engine fault, operator presence status, clutch engage/disengagement status

Dimensions

Dimensions Chip Containment: .2 cu m | Cutterwheel Cut Below Ground: 38.1 cm | Cutterwheel Cut Above Ground: 61 cm| Cutterwheel Straight Line Dimension: 119.4 cm | Cutterwheel Diameter without Teeth: 43.2 cm | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block | Cutterwheel Thickness: 1.3 cm | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm)
Overall Height Transport: 132.1 cm
Overall Width Transport (without duals): 126.5 cm | without duals: 88.9 cm
Length 279.4 cm
Width 126.5 cm
Height 132.1 cm

Capacities

Hydraulic Capacity Tank: 15.1 L

Weights

Weight Engine Option One: 582.9 kg

Features

Features Controller: Vermeer ACS | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Jackshaft Bearing Type: Sealed ball | Reversible Pockets: 16 | Directional Control: Manual hydraulic valve | Number of Pockets: 16 | Tooth Description: Yellow Jacket cutter system | Number of Teeth: 16 | Number of Indexes: 2 | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Fender Description | Cutterwheel Guard | Toolbox Description | System Type: Open-loop series system
Belt Quantity Number of Primary: 2 individual (matched pair) | Number of Secondary: 6
Belt Type V-Belt
Axle Bearing Extensions, Rear Rigid
Oil Type Recommended Type: Vermeer HyPower 68

Product Photography