2024 Vermeer® Stump Cutters SC362
- Year 2024
- Make Vermeer®
- Model Stump Cutters
2024 Vermeer® Stump Cutters SC362
2024 Vermeer® Stump Cutters SC362
Developed with rental yards and tree care contractors in mind.Vermeer has expanded its stump cutter lineup offering increased options for the customer. Equipped with a 35-hp (26.1 kW) Vanguard engine, a hydraulic ground drive and a belt driven cutter head, the SC362 provides operators with ample power and maneuverability to take out medium-sized stumps with the productivity and reliability that the field demands. The Vermeer SC362 is a great addition to any tree care or rental equipment fleet and the right complement to any Vermeer brush chipper or mini skid steer.
Features may include:
35-hp Vanguard gasoline engine- A 35-hp (26.1 kW) Vanguard gasoline engine offers low vibration, low emissions and a limited three-year warranty.
- Move easily between stumps with the selectable two-speed ground drive.
- All of the belts are found on one side of the machine for convenient belt servicing
Drivetrain
Steering
Steerable Axle Typ: Hydraulic steering, oscillating axle
Suspension
Suspension
Rigid/Fixed (Rear)
Wheels & Tires
Tires, Front Specification
Tires - Option One: 5.7" x 8" (14.5 x 20.3 cm) duals standard
Battery
Battery
400 CCA
Electric
Electrical
Shutdown System: Engine low oil pressure | System Voltage: 12 V
Operational
Operating Speed
Low Travel: 20.1 m/min| High Travel: 40.5 m/min | Cutterwheel: 1400 rpm
Performance
Noise Level
Sound Power: 106
Hydraulics
Maximum Pressure
System relief: 140 bar
Hydraulic Pump
Flow at Maximum RPM: 14 L/min
Hydraulic Type
Flow Control: AutoSweep® (option) or 2 speed ground drive
Chassis
Chassis
Control Station Description: Fixed side location
Frame Type
Description: Welded tube and plate steel
Lights and Safety
Lighting
Warning: Operator presence status, clutch engage/disengagement status
Dimensions
Dimensions
Chip Containment: 7.7 cu ft (.2 cu m) | Cutterwheel Cut Below Ground: 38.1 cm | Cutterwheel Cut Above Ground: 61 cm | Cutterwheel Straight Line Dimension: 119.4 cm | Cutterwheel Diameter without Teeth: 43.2 cm | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block | Cutterwheel Thickness: 1.3 cm | Bearing Dimensions: 1.3 bore | Jackshaft Dimension: 1.3 | Cutterwheel Shaft: 1.8" (4.8 cm)
Overall Height
Transport: 134.6 cm
Overall Width
Transport (with duals): 126.5 cm | Transport (without duals): 88.9 cm
Length
279.4 cm
Width
126.5 cm
Height
134.6 cm
Capacities
Hydraulic Capacity
Tank: 15.1 L
Weights
Weight
Engine Option One: 598.7 kg
Features
Features
Jackshaft Bearing Type: Sealed ball | Reversible Pockets: 16 | Directional Control: Manual hydraulic value | Switches: Two-speed ground drive, clutch engage/disengage, operator presence handles | Controller: Vermeer ACS | Number of Pockets: 16 | Tooth Description: Yellow Jacket™ cutter system | Number of Teeth: 16 | Number of Indexes: 2 | Filtration Method: Pump suction strainer (100 mesh) and 6 micron return filter | Fender Description | Cutterwheel Guard | Toolbox Description | System Type: Open-loop series system
Belt Quantity
Number of Primary: 2 individual (matched pair) | Number of Secondary: 6 Banded
Belt Type
V-Belt
Axle Bearing Extensions, Front
Rigid
Oil Type
Recommended Type: Vermeer HyPower 68