Current Vermeer® Rental Stump Cutters

2024 Vermeer® Stump Cutters SC382

2024 Vermeer® Stump Cutters SC382

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model Stump Cutters
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2024 Vermeer® Stump Cutters SC382

2024 Vermeer® Stump Cutters SC382

  • Year 2024
  • Manufacturer Vermeer®
  • Model Name Stump Cutters
  • Trim Name SC382
  • Generic Type (Primary) Stump

2024 Vermeer® Stump Cutters SC382

The SC382 was made for the tough stumps on your jobsite.

This SC382 Vermeer stump cutter is equipped with a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine. The optimized cutting wheel on the SC382 gives this machine aggressive cutting capabilities.

Features may include:

Standard four-wheel drive
  • The SC382 stump cutter is equipped with standard four-wheel drive to offer traction and maneuverability in difficult transport conditions.
Operator presence system
  • The operator presence system is intended to enhance operator safety by automatically stopping the cutter wheel when the operator releases the hydraulic cutter wheel controls.
37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine
  • The SC382 stump cutter has a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine.

Drivetrain

Steering Steerable Axle Type: Hydraulic steering, oscillating axle

Suspension

Suspension Rigid/fixed (rear)

Brakes

Brake System Type Spring-applied, hydraulic release at rear motors

Wheels & Tires

Tires, Front Specification Tires - Option One: 5.7"x 8" (14.5 x 20.3 cm) dual standard

Battery

Battery 400 CCA

Electric

Electrical Shutdown System: Engine low oil pressure | System Voltage: 12 V

Operational

Operating Speed Low Travel: 19.8 m/min | High Travel: 39.6 m/min | Cutterwheel: 1560 rpm

Hydraulics

Maximum Pressure System relief: 170.3 bar
Hydraulic Pump Flow at Maximum RPM: 624.2 L/min
Hydraulic Type Flow Control: SmartSweep

Chassis

Chassis Control Station Description: Fixed side location
Frame Type Description: Welded tube and plate steel

Lights and Safety

Lighting Warning: Oil pressure, engine fault, operator presence status, clutch engage/disengage status

Dimensions

Dimensions Chip Containment: .2 cu m | Cutterwheel Cut Below Ground: 38.1 cm | Cutterwheel Cut Above Ground: 61 cm | Cutterwheel Straight Line Dimension: 119.4 cm | Cutterwheel Diameter without Teeth: 43.2 cm | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block | Cutterwheel Thickness: 1.3 cm | Bearing Dimensions: 1.3 bore | Degree of Oscillation: 12 deg | Jackshaft Dimension: 1.3 | Cutterwheel Shaft: 1.8" (4.8 cm)
Overall Width Transport (without duals): 90.2 cm
Length 299.7 cm
Width 127.3 cm
Height 134.6 cm

Capacities

Hydraulic Capacity Tank: 24.6 L

Weights

Weight With Chip Blade Option (Additional): 85 lbs (38.6 kg) | Engine Option One: 884.5 kg

Features

Features Jackshaft Bearing Type: Sealed ball | Reversible Pockets: 20 | Directional Control: Electric over hydraulic | Switches: Two-speed 2x4 and 4x4 ground drive, cutter wheel engage/disengage, creep, blade (if applicable) | Controller: Danfoss | Number of Pockets: 20 | Tooth Description: Yellow Jacket cutter system | Number of Teeth: 20 | Number of Indexes: 2 | Filtration Method: 10 micron fill strainer and 6 micron return filter | Fender Description | Cutterwheel Guard | Toolbox Description | System Type: Open-loop series system
Belt Quantity Number of Primary: 2 individual (matched pair) | Number of Secondary: 6 banded
Belt Type V-belt
Axle Bearing Extensions, Front Rigid
Oil Type Recommended Type: Vermeer HyPower 68

Product Photography