2024 Vermeer® Stump Cutters SC48TX
- Year 2024
- Make Vermeer®
- Model Stump Cutters
2024 Vermeer® Stump Cutters SC48TX
2024 Vermeer® Stump Cutters SC48TX
Get in and out of sites efficiently with enough power to tackle the job.The Vermeer SC48TX stump cutter delivers high efficiency from engine to the stump grinding wheel through a 48-hp diesel engine with a direct drive system. This machine gives operators access to tight and challenging jobsites with a narrow footprint and low ground pressure to complete a variety of jobs. Plus, operators can add features like the remote control and backfill blade to help increase productivity.
Features may include:
48-hp (36-kW) diesel engine- The 48-hp (36-kW) diesel engine provides optimal fuel economy, durability and performance to efficiently cut stumps of all sizes. Backed by proven worldwide service and support to maximize productivity.
- This direct-drive system delivers the maximum amount of power to the cutter wheel and requires minimal maintenance.
- Enhance jobsite productivity with the Vermeer cutting system – a two-sided cutter wheel that minimizes recirculation of material and maximizes cutting performance.
- The retractable tracks allow operators to navigate the machine through narrow jobsite entrances.
Engine
Engine Manufacturer
CAT
Emissions
T4F/Stage V
Displacement
C1.7
Cylinder Liners
3
Engine Power
Gross (Maximum): 35.8 kw
Engine Torque
166.8 Nm
Air Cleaner
Dry-type, restriction indicator, evacuator valve and safety element
Oil Filter
Spin-on
Cooling
Medium: Water/antifreeze
Fuel System
Fuel System
Max Fuel Consumption: 11 lph
Fuel Type
Ultra-low sulfur diesel
Drivetrain
Gearbox
Lower: Straight bevel
Clutch
Electric clutch with brake
Drive Shaft
2 universal joints | 2 standard with double lip seal
Brakes
Brake System Type
Spring-applied and hydraulically-released dual parking brakes
Battery
Battery
950 CCA
Electric
Electrical
System Voltage: 12 | Switches: Boom swing, boom height, creep propel, ignition, clutch, track gauge, track speed range and throttle, blade | Controller: Danfoss | Display: Multifunction display (MFD) that displays hours, fuel level, engine speed, engine faults and engine status | Shutdown System: High engine temperature and low oil pressure
Alternator
85A
Operational
Operating Speed
Cutterwheel: 1235 rpm | High Travel: 2.4 km/h | Low travel: 1.8 km/h | Low Speed Travel: 30.5 m/min | High Speed Travel: 42.7 m/min
Performance
Noise Level
107 dB(A)
Hydraulics
Hydraulic Type
System: Tandem gear pump, pressure balanced | Filtration Method: Full-flow 4-micron return filter, suction strainer
Hydraulic Flow
Pump Flow at Maximum RPM: 41.6 L/min | track: 11.4 gpm (43.1 L/min)
Maximum Pressure
System relief: 199.9 bar | track: 2900 psi
Ground Pressure
Soft Ground: 39.2 kPa
Pump Type
Track Drive: Hydrostatic
Hydraulic Type
System Type: Open loop
Chassis
Frame Type
Welded tube and plate steel
Chassis
Control Station: Description Swing out | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate
Lights and Safety
Safety Features
Warning Lights: Engine warning
Dimensions
Dimensions
Fan 16.5 in | Chip blade width (without extensions): 86.4 cm | Cutterwheel Cut Above Ground: 71.1 cm | Blade Travel Above Ground: 21.6 cm | Cutterwheel Thickness: 3.5 cm | Cutterwheel Diameter: 61 cm | Cutterwheel Cut Below Ground: 40.6 cm | Maximum Angle of Continuous Operation: 35 deg | Cutterwheel Straight Line: 165.1 cm | Chip Containment: .7 cu m
Track Length
on Ground: 47 in (119.4 cm)
Track Width
Rubber 7-in
Length
355.6 cm
Width
(tracks retracted): 88.9 cm | (tracks extended): 124.5 cm
Height
(non-remote unit): 193 cm | (remote unit): 215.9 cm
Capacities
Fuel Capacity
54.9 L
Hydraulic Capacity
Tank: 34.1 L
Cooling System
oolant Capacity (Engine and Radiator): 11 L
Oil capacity
Oil Volume with Filter: 5 L | Lower Gearbox: 1.5 L
Weights
Weight
1701 kg
Features
Features
Type of Idler: Cast | Tooth Description: Vermeer cutting system | Number of Teeth: 27 | Number of wear plates: 6 | Reversible Pockets/Teeth: 24
Oil Type
Recommended: 10W-30 | Oil Type - Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended: Vermeer highpower 68